The Opel Astra 2020 1.2 Turbo 130HP weighs 1286 Kg / 2835 lbs. What is the top speed of a Opel Astra 2020 1.2 Turbo 130HP? The Opel Astra 2020 1.2 Turbo 130HP top speed is 215 Km/h / 134 mph. Is Opel Astra 2020 1.2 Turbo 130HP All Wheel Drive (AWD)? No, the Opel Astra 2020 1.2 Turbo 130HP is not All Wheel Drive (AWD). It's Front Wheel Drive (FWD). The Opel Astra K 1.4 Turbo 150HP weighs 1278 Kg / 2818 lbs. What is the top speed of a Opel Astra K 1.4 Turbo 150HP? The Opel Astra K 1.4 Turbo 150HP top speed is 215 Km/h / 134 mph. Is Opel Astra K 1.4 Turbo 150HP All Wheel Drive (AWD)? No, the Opel Astra K 1.4 Turbo 150HP is not All Wheel Drive (AWD). It's Front Wheel Drive (FWD). 2003 L-Series 3.0L Sedan. Re: Astra hard start after filling tank. You're right about pumping the gas pedal - no longer effective with EFI systems. This worked in the old days of carburetors with fuel bowls and an actual pump to inject raw fuel into the engine at any time but this doesn't apply with throttle bodies lacking actual fuel bowls. Rotate the pedals into position (as shown in the illustration) and put the bicycle on the foremost wheel recess. Make sure that the bicycle stands centrally on the wheel recesses. 3. Secure both bicycle wheels to the Push down the rack (1) and swivel wheel recesses using the strap handle (2) backwards to engage. The locking and unlocking of the fuel door is a function of the power door lock system. The fuel door release actuator is supplied by the door lock signal circuit and the driver door unlock signal circuit which is switched through the fuel door relay. The fuel door relay coil is controlled by the body control module (BCM). Fuel tanks have venting lines that can get clogged or blocked; in cases like this, the situation caused by fuel back-up in the fill pipe can happen, since the clogged vent line will prevent rapid The estimated cost of a purge valve replacement is about $155 to $170. The total cost is broken down as follows; parts cost about $112, and labor costs between $43 and $58. However, the location of the purchase of the parts and the replacement should be considered in case of a slight difference in the estimated total cost of the replacement of Remove the 4 fuel injectors (1) in conjunction with the 4 fuel injector gaskets (5). Installation Procedure Note: Use both sides of EN-47632 cleaning tool , one for loosening the dirt and the other to haul out the dirt. MundHl.